15 mm Pilot Valve – 15S1C2B2ANMAM
Similar picture

15 mm Pilot Valve – 15S1C2B2ANMAM

Quantity Unit price
To 15 €34.90 *
From 16 €29.66 *
From 41 €24.43 *
From 71 €20.94 *
From 101 €19.19 *
Content: 1

Prices plus VAT plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays


Your benefits:

  • Large quantity on stock
  • Delivery within 24h*
  • 30 days cash-back guarantee
AMP Industrial, 24V, DC, 1.0 W, Assembling opposite side (external) 3/2NC ∅ 0.8/1.0mm, NBR,... more

AMP Industrial, 24V, DC, 1.0 W, Assembling opposite side (external) 3/2NC ∅ 0.8/1.0mm, NBR, monostable (no lock) Brass


The 15 mm pilot valve has been designed and developped by Amisco as a logical evolution of the traditional product range manufactured for the pneumatic market.
The 15 mm solenoid valve is designed for those applications, more and more common on the actual market, where besides high performances in terms of pressure and flow, minimum dimension, very low power consumption and high reliability even at high cycling rates are specified.

This system is designed for use with air.
The solenoid valve is composed by an encapsulated coil joined to a plastic valve body made by PPS. The assembly is not detachable.


All the 15 mm pilot valves feature:

  • heat resistant bobbin moulded with 30% glass filled polyester (PBT)
  • class H 200°C copper wire according to IEC 60317-13
  • encapsulation with high quality specially designed glass filled polyamide (PA6.6)
  • stainless steel guiding tube
  • plunger and core made by a magnetic stainless steel specially designed for solenoid applications


The pilot assembly is designed for more than 50 million cycles.
The valve is normally equipped with NBR seals and monostable manual override, and it can be delivered with a specially designed seal and screws for its assembling on the main valve units.

The coil is designed and manufactured according to EN 60204.1 and VDE 0580 and it’s suitable for industrial ambient conditions. For use in different ambients with high humidity, take contact with Amisco. All the components used are UL-listed.. 

The coil is also in conformity with 94/9/EC ATEX for electrical apparatus of group II, category 3:
GAS:   Ex nA IIC Tx Gc
DUST:  Ex tc IIIC Tx Dc.


Different electrical connections are available. The configuration of the valve unit can be with the pneumatic ports on the same side of the electrical connections or on the opposite side.


All the pneumatic connections are located in the valve body and the Amisco 15mm pilot valve is suitable for the use of subbases or the assembling in batteries, for common pressure and exhaust location.


For further information about ATEX versions, see the ATEX Products

Eigenschaften "15 mm Pilot Valve – 15S1C2B2ANMAM"
Product family: 15 mm
Electrical connection: AMP Industrial
Nominal Voltage: 24V
Supply current: Direct current (D.C.)
Power: 1.0W
Assembling Coil-valve: same side (external seal)
Valve-Type: 3/2 NC ∅ 0.8/1.0 mm
Seal Material: NBR
Temperature range: -10° C bis +50°C
Downloads "15 mm Pilot Valve – 15S1C2B2ANMAM"